Skip to content
🏁 Don't miss FREE shipping: orders $50+ ship free. Only $5 flat-rate shipping under $50
🏁 FREE Shipping on Orders $50+
Z-Tech helmet anchor kits in red, blue, grey, black and silver on a pit-garage workbench, with a blurred racing helmet behind – Fast Racer

Zamp 8A FIA vs 8A vs 2A/3A/6A Helmet Anchors: Which Fits Yours?

The main difference between the Zamp Z-Tech helmet anchors kits is which device clips they fit. The 2A/3A/6A Helmet Anchors Kit fits the Z-Tech 2A, 3A and 6A, plus the 8A when it runs Zamp spring clips. The 8A Helmet Anchors Kit and the 8A FIA Helmet Anchors Kit fit the 8A-style clips. Choose the 8A FIA kit if you want anchors rated FIA 8858-2010 as well as SFI 38.1. FAST RACER sells all three.

Your Zamp Z-Tech device already includes helmet hardware for one helmet, so these kits are for a second helmet or for replacing worn hardware. This comparison covers which 2A/3A/6A kit, 8A kit or 8A FIA kit fits your device, using the product listings and Zamp's owner's manuals. To compare head and neck restraints across brands, see our HANS devices.

Zamp Helmet Anchors Kits: Side-by-Side Comparison

All three are a set of two anchors that mount into a helmet's M6 inserts. The differences are clip compatibility, certification, finish and price.

Attribute 2A/3A/6A Kit 8A Kit 8A FIA Kit
Part number NZHC001A NZHC008A NZHC008F02 / F04 / F15
Fits these clips Z-Tech 2A, 3A and 6A clips; Zamp spring clips (NZSC1015) on the 8A 8A-style clips 8A-style clips
Not compatible with 8A-style clips 2A, 3A and 6A clips 2A, 3A and 6A clips
Certification SFI 38.1 SFI 38.1 FIA 8858-2010 and SFI 38.1
In the box Set of 2 anchors Set of 2 anchors Set of 2 anchors (Tie)
Finish Silver Black with Z-TECH and SFI 38.1 silk screen Red, blue or gray
Helmet mount M6 insert M6 insert M6 insert (Tie)
Relative price Lowest Middle Highest
Best for A second helmet for a 2A, 3A or 6A, or an 8A on spring clips A second helmet for an 8A on SFI-only rules An 8A owner who wants FIA 8858-2010 anchors

Zamp Helmet Anchors Kits: The 5 Key Differences

Which Zamp helmet anchors kit fits your device?

Your device's clips decide the kit, not the other way round. The Zamp Z-Tech 2A, 3A and 6A use the 2A/3A/6A Helmet Anchors Kit. The Z-Tech 8A is certified with two hardware types: the 8A-style clips with 8A helmet hardware, or Zamp spring clips with the 2A-style helmet kit. Zamp includes the helmet kit with the 8A for either clip style. So an 8A owner can use the 8A kit, the 8A FIA kit or, on spring clips, the 2A/3A/6A kit. A 2A, 3A or 6A owner can only use the 2A/3A/6A kit. Not sure which device fits you? See our Zamp Z-Tech 2A vs 6A vs 8A comparison.

Do you need FIA 8858-2010 helmet anchors?

Only if your rulebook or helmet setup calls for FIA-rated anchors. The 8A FIA Helmet Anchors Kit is certified to both FIA 8858-2010 and SFI 38.1. The 2A/3A/6A kit and the standard 8A kit are SFI 38.1. FIA 8858 is the international standard covering a head and neck restraint and its helmet anchors, while SFI 38.1 is the US specification. Rated anchors do not change the device's own rating: the Z-Tech 8A device carries SFI 38.1. This difference favors the FIA kit for drivers in FIA-sanctioned events.

Can a Zamp Z-Tech 8A use the 2A/3A/6A kit?

Yes, with Zamp spring clips (NZSC1015) on the 8A. Zamp lists this as the 8A's second certified hardware setup: spring clips paired with the 2A-style helmet kit. The pairing is strict in both directions. The 8A-style clips work only with 8A helmet hardware, and the spring clips work only with the 2A/3A/6A helmet hardware. This matters if you already own a 2A or 6A and want one style of hardware on every helmet.

Do the kits install the same way?

Mostly, yes. All three mount into a helmet's M6 inserts with an M6 screw, and Zamp's manuals call for blue thread locker on the end of the screw, tightened snugly without cross-threading. The 2A-style kit is a post, a baseplate and an M6 screw for each side. For the 8A kits, Zamp's 8A manual adds two steps: remove the black cap from the back of the kit first, and point the center post toward the back of the helmet. For helmets without M6 inserts, Zamp's manuals list an accessory backplate, part NZBP0016.

Which colors and finishes are available?

Each kit has its own finish. The 2A/3A/6A kit is silver. The standard 8A kit is black with Z-TECH and SFI 38.1 silk-screened on it. The 8A FIA kit is offered in red, blue and gray, so you can match the anchors to your helmet. Color availability changes, so check the 8A FIA product page for the colors in stock before you order.

Pros and Cons

Zamp Z-Tech Series 2A/3A/6A Helmet Anchors Kit

Pros

  • Lowest price of the three kits.
  • One kit fits the Z-Tech 2A, 3A and 6A.
  • Also works on the Z-Tech 8A with Zamp spring clips.
  • SFI 38.1 rated, set of two anchors.

Cons

  • Not compatible with 8A-style clips.
  • SFI 38.1 only; no FIA 8858 version is listed.

Zamp Z-Tech Series 8A Helmet Anchors Kit

Pros

  • Made for the 8A-style clips that ship on the Z-Tech 8A.
  • SFI 38.1 rated, set of two anchors.
  • Costs less than the 8A FIA kit.

Cons

  • Not compatible with 2A, 3A or 6A clips.
  • SFI 38.1 only.
  • Black only.

Zamp Z-Tech Series 8A FIA Helmet Anchors Kit

Pros

  • Certified to FIA 8858-2010 and SFI 38.1.
  • Made for the 8A-style clips.
  • Offered in red, blue and gray.

Cons

  • Highest price of the three kits.
  • Not compatible with 2A, 3A or 6A clips.
  • FIA-rated anchors do not make the device itself FIA rated.

Which Should You Buy?

Start with the clips on your Zamp Z-Tech device, then decide whether you need FIA-rated anchors.

Choose the 2A/3A/6A Helmet Anchors Kit if:

  • You run a Zamp Z-Tech 2A, 3A or 6A and need hardware for a second helmet.
  • You need to replace worn 2A-style hardware.
  • You run an 8A on Zamp spring clips.
  • You want the lowest-priced kit.

Choose the 8A Helmet Anchors Kit if:

  • You run a Zamp Z-Tech 8A with its standard 8A-style clips.
  • Your series accepts SFI 38.1.
  • You want matching black 8A hardware on a second helmet.

Choose the 8A FIA Helmet Anchors Kit if:

  • You run a Zamp Z-Tech 8A with 8A-style clips.
  • Your helmet setup or series calls for FIA 8858-2010 anchors.
  • You want red, blue or gray anchors.

Consider neither if:

  • Your series requires an FIA 8858 head and neck restraint. Anchors alone do not change the device's rating, so compare FIA-rated devices in our HANS devices range.
  • You are buying your first Zamp Z-Tech. Every device already includes helmet hardware for one helmet.

Buy with less risk. Orders over $50 ship free to the 48 contiguous US states and Washington, D.C. FAST RACER accepts returns and exchanges within 30 days for eligible items that are unused and in as-new condition, in the original packaging. Accessories that come in sealed packaging cannot be returned once opened, so check compatibility before you open the kit. The manufacturer's warranty covers defects in materials and workmanship, and FAST RACER can act on your behalf with Zamp on a claim.

Frequently Asked Questions

Which Zamp helmet anchors kit do I need for a Zamp Z-Tech 8A?

It depends on the clips on your Zamp Z-Tech 8A. With the standard 8A clips, use the Zamp Z-Tech Series 8A Helmet Anchors Kit or the 8A FIA Helmet Anchors Kit. With Zamp spring clips, use the 2A/3A/6A Helmet Anchors Kit. The 8A clips and the spring clips each work only with their own matching hardware.

What is the price difference between the Zamp helmet anchors kits?

The Zamp Z-Tech Series 2A/3A/6A Helmet Anchors Kit is the lowest-priced of the three, the standard 8A Helmet Anchors Kit sits in the middle, and the 8A FIA Helmet Anchors Kit costs the most. The extra cost of the FIA kit pays for its FIA 8858-2010 rating. Check each product page for current prices.

Do Zamp helmet anchors kits have a warranty?

Zamp helmet anchors kits are covered by the manufacturer's warranty for defects in materials and workmanship, and FAST RACER can act on your behalf with Zamp on a claim. The warranty does not cover misuse, accidents, alteration or abnormal wear. A warranty length for the kits is not published, so confirm it with FAST RACER before you buy.

Does each Zamp helmet anchors kit cover both sides of the helmet?

Yes. Each Zamp Z-Tech helmet anchors kit, whether the 2A/3A/6A kit, the 8A kit or the 8A FIA kit, is a set of two anchors, one for each side of the helmet. One kit outfits one helmet with M6 inserts. A second helmet needs its own kit, mounted the same way.

Can I use the Zamp 8A FIA helmet anchors on a Zamp Z-Tech 2A or 6A?

No. The Zamp Z-Tech Series 8A FIA Helmet Anchors Kit is not compatible with the Z-Tech 2A, 3A or 6A helmet clips. Those three devices use the Zamp Z-Tech Series 2A/3A/6A Helmet Anchors Kit, part number NZHC001A. The 8A FIA kit works with the 8A-style clips only.

The Bottom Line

The main difference between the Zamp Z-Tech helmet anchors kits is which clips they fit. Choose the 2A/3A/6A Helmet Anchors Kit for a 2A, 3A or 6A, or for an 8A on spring clips. Choose the 8A Helmet Anchors Kit for an 8A with 8A-style clips under SFI rules. Choose the 8A FIA Helmet Anchors Kit when you want FIA 8858-2010 and SFI 38.1 anchors on an 8A.

Emerson Bersaghi

by Emerson Bersaghi

Emerson Bersaghi is Co-Founder, COO, and CGO of Fast Racer, an e-commerce brand scaling motorsport apparel, parts, and performance gear worldwide. A lifelong kart racer, Emerson brings 29 years of executive leadership at Whirlpool Corporation to Fast Racer's growth strategy. He holds an Executive MBA from Purdue's Daniels School of Business, an MBA from FGV EAESP in Brazil, and a B.S. in Mechanical Engineering from UDESC. At Fast Racer, he drives growth strategy, brand positioning, and strategic partnerships behind the company's sustained double-digit YoY expansion.

Connect with LinkedIn

Next article Zamp Z-Tech 2A vs 6A vs 8A: Which One Fits You?

Q&A

1 answered question

  • What is Zamp helmet hardware?

    seo@fastracer.com

    • Staff Answer

      Yes, if your Zamp Z-Tech 8A uses its standard 8A clips. The 8A ships with a helmet kit for one helmet, and the Zamp Z-Tech Series 8A FIA Helmet Anchors Kit works with the same 8A-style clips, so it can replace a lost or worn set.

      It also brings an FIA 8858-2010/SFI 38.1 rating to your helmet hardware. If your 8A runs Zamp spring clips, replace its hardware with the Zamp Z-Tech Series 2A/3A/6A Helmet Anchors Kit instead.

      seo@fastracer.com

  • How do I tell which clips my Zamp Z-Tech uses?

    seo@fastracer.com

    • Staff Answer

      Start with the model. The Zamp Z-Tech 2A, 3A and 6A use Zamp spring clips. The Z-Tech 8A ships with 8A clips, but it is also certified with Zamp spring clips (NZSC1015), so an 8A can run either clip style.

      The helmet kit in your 8A box matches the clips you chose: 8A helmet hardware (NZHC008A) with 8A clips, or the 2A-style kit (NZHC001A) with spring clips. Then order the matching kit: the Zamp Z-Tech Series 2A/3A/6A Helmet Anchors Kit for spring clips, or the Zamp Z-Tech Series 8A FIA Helmet Anchors Kit for 8A clips.

      seo@fastracer.com

  • Do I need new helmet anchors when I upgrade from a Z-Tech 2A or 6A to an 8A?

    seo@fastracer.com

    Pending answer submission

  • What is the difference between Zamp 8A clips and spring clips?

    seo@fastracer.com

    • Staff Answer

      Zamp 8A clips are the newest Z-Tech clip style. They connect to an 8A-style helmet kit that Zamp Racing describes as spring-loaded for easy in-and-out connection. Zamp spring clips connect to the 2A-style helmet kit and come on the Z-Tech 2A, 3A and 6A, and Zamp designed them to make disconnecting from the helmet easier.

      Each clip style works only with its own hardware. The Z-Tech 8A is certified with either style. Match your clips to the Zamp Z-Tech Series 2A/3A/6A Helmet Anchors Kit or the Zamp Z-Tech Series 8A FIA Helmet Anchors Kit.

      seo@fastracer.com

  • Do I need FIA-rated helmet anchors for my Zamp Z-Tech?

    seo@fastracer.com

    • Staff Answer

      Only if your series or event requires FIA-rated helmet hardware. The Zamp Z-Tech 2A, 6A and 8A are certified to SFI 38.1, and Zamp's FIA option is the Zamp Z-Tech Series 8A FIA Helmet Anchors Kit, rated FIA 8858-2010/SFI 38.1. It works with 8A clips only, so spring-clip setups have no FIA-rated Zamp kit.

      FIA-rated anchors do not change your device's own rating. Check your rulebook first, then compare FIA-rated devices in our HANS devices range.

      seo@fastracer.com

View all