Call or Text,
M-F, 9 AM - 06 PM ET
Call or Text
Mon-Fri, 09 AM - 06 PM ET
The Zamp RZ-63S is a Snell SA2025 racing helmet built for drivers who want a lightweight Aramid Mix shell, a performance-oriented long-oval fit, flexible airflow options, and an aerodynamic chin-bar design. It is especially well suited to open-cockpit and asphalt racers, while its versatile setup can also serve drivers across other motorsports disciplines.
The new Zamp RZ-63S is a Snell SA2025 certified auto racing helmet built with a lightweight Aramid Mix shell. It combines an aerodynamic chin-bar design with Zamp’s DD-Air ventilation system, a removable and washable interior, communication-ready ear pockets, and pre-drilled M6 inserts for compatible head and neck restraint hardware.
Designed for racers across a wide variety of disciplines, the RZ-63S is particularly well suited to open-cockpit and asphalt drivers. Its flexible airflow options and larger duckbill help improve ventilation, reduce exposure to track debris, and support helmet stability at high speeds.
The RZ-63S is designed for adult motorsports drivers across a range of disciplines, with particular attention to open-cockpit and asphalt racing. Its larger duckbill, generous venting, and optional forced-air configurations make it a practical choice for drivers dealing with speed, debris, and heat inside the cockpit.
Because helmet requirements vary by class and sanctioning body, drivers should confirm that Snell SA2025 is accepted for their event. Fit is equally important, particularly with the RZ-63S's long-oval interior profile.
At the center of the RZ-63S is Zamp's lightweight Aramid Mix shell. According to Zamp, this high-strength construction is designed to reduce weight and driver fatigue without giving up the structure required of a Snell SA2025 helmet.
That balance matters during long sessions. Zamp positions the lightweight Aramid Mix shell as a way to help reduce driver fatigue during extended sessions. The RZ-63S is built to give drivers a performance-focused feel while retaining the certification expected from a modern auto Racing Helmet.
The larger duckbill at the bottom of the chin bar is one of the RZ-63S helmet's most visible features. Zamp designed it to help deflect debris away from the driver and improve helmet stability when speeds rise.
For open-cockpit drivers, Zamp designed the larger duckbill to support helmet stability as speeds increase. The extended chin-bar profile is intended to manage that airflow more effectively. Zamp also offers optional front and rear aerodynamic accessories for drivers who want to fine-tune the helmet's setup for their application.
The RZ-63S uses Zamp's DDAIR system, a 360-degree dual-density air-channeling design that directs airflow through the EPS and shell. Out of the box, the helmet has two large vents on each side of the chin bar and two vents above the shield.
The goal is to move air around more of the helmet rather than concentrating ventilation in only one area. The system is designed to help manage heat buildup in demanding conditions, although actual cooling will depend on cockpit airflow, ambient temperature, race duration, and whether natural-air or forced-air accessories are used.
Yes. The Zamp RZ-63S supports natural-air and forced-air configurations. Drivers can install a compatible top-air accessory to direct forced air through the helmet’s internal channels.
Threaded ports on both sides of the chin bar can accept compatible air accessories or clear scoops. This gives racers more flexibility when routing air around roll cages, cockpit equipment, or communication wiring. Because accessories and hoses vary, confirm the exact parts needed for your installation before ordering.
The RZ-63S comes with a clear Z-20 Series shield and adjustable tensioning tear-off posts. Zamp specifies 12.125-inch banana-style tear-offs, including its P208Z tear-offs, for this shield setup.
The adjustable posts allow a driver to set the tear-off tension for a secure fit. Tear-offs can help drivers maintain visibility in racing environments where track debris collects on the shield. Additional Z-20 shield options are available separately for drivers who need a different tint, anti-fog treatment, or track-specific configuration.
The helmet is communication-ready, with built-in ear pockets for compatible Zamp ear cups and speakers. Depending on the communication equipment selected, the setup can support one-way or two-way communication.
The built-in ear pockets provide dedicated space for compatible Zamp ear cups and speakers. Ear cups, speakers, wiring, and related communication accessories are optional, so drivers should check what is included with the helmet and what must be purchased separately.
The Zamp RZ-63S comes with pre-drilled M6 threaded inserts on the left and right sides for compatible head and neck restraint hardware. This avoids drilling the shell when preparing the helmet for an approved restraint system.
The inserts do not mean every anchor or restraint can be installed without checking the manufacturer's instructions. Confirm that the restraint, anchors, installation angle, and hardware are approved for your racing application, and follow the requirements of your sanctioning body.
The RZ-63S has a performance-oriented long-oval fit. It is narrower from side to side and longer from front to back, which may suit drivers whose heads feel pressured at the forehead or back in a rounder helmet shape.
Helmet fit is personal, and the same labeled size can feel different across models. Measure your head according to the current Zamp sizing guide, then evaluate even contact around the crown, secure cheek support, and any pressure points. If you are between sizes or uncertain about your head shape, contact FAST RACER before ordering.
Yes. The RZ-63S uses a removable 28 Series fire-retardant crown liner and removable 31 Series ultra-soft cheek pads. Both components can be taken out for cleaning, making it easier to keep the helmet fresh between race weekends.
The replaceable interior also provides room for fit adjustment. A driver may be able to use a different compatible crown-liner or cheek-pad size to refine the fit. Any change should still leave the helmet evenly secure, with no excessive movement when the head turns or the chin bar is gently moved.
Zamp lists the RZ-63S in Gloss White and Matte Black. The review transcript highlights the Gloss White and Matte Black options.
What I really like:
A couple small things to know:
The RZ-63S is worth considering if you want a lightweight SA2025 Zamp Helmet with a long-oval performance fit, strong airflow flexibility, a removable interior, communication readiness, and M6 restraint inserts. Its larger duckbill and multiple air configurations make it particularly relevant to open-cockpit and asphalt racers.
It may not be the right fit for everyone. Drivers with a rounder head shape may prefer another model, while dirt racers who prioritize more sealed dust protection should compare the RZ-63S with a dirt-specific helmet. Your track or sanctioning body should always have the final word on certification and equipment requirements.
The Zamp RZ-63S is available through Fast Racer. If you have questions about sizing, head shape, shields, tear-offs, air accessories, communications, or restraint compatibility, reach out to our team before ordering. We will help you narrow down the setup that fits your racing needs.
Emerson Bersaghi is Co-Founder, COO, and CGO of Fast Racer, an e-commerce brand scaling motorsport apparel, parts, and performance gear worldwide. A lifelong kart racer, Emerson brings 29 years of executive leadership at Whirlpool Corporation to Fast Racer's growth strategy. He holds an Executive MBA from Purdue's Daniels School of Business, an MBA from FGV EAESP in Brazil, and a B.S. in Mechanical Engineering from UDESC. At Fast Racer, he drives growth strategy, brand positioning, and strategic partnerships behind the company's sustained double-digit YoY expansion.
Connect with 
10 answered questions
Pending answer submission
