Call or Text,
M-F, 9 AM - 06 PM ET
Call or Text
Mon-Fri, 09 AM - 06 PM ET
The FHR is the greatest safety innovation since the full-face helmet and the fire-retardant racing suit. It reduces the risk of a basilar skull fracture or muscle stretching during an intense deceleration, the primary cause of death in motor racing. Two of every three drivers now purchase FHRs, even when the device is not compulsory in their racing series.
The Zamp Z-Tech Series 8A FHR/Head and Neck Restraint Device is extremely comfortable and lightweight, with little restriction in shoulder and chest areas.
Key features include:
The high back provides a more natural pull angle and easy side-to-side movement.
Shorter Arms and No Rigid Materials on the Spine.
Stainless steel hardware built with high quality and strength.
Kevlar Webbing Tether connects the helmet to the restraint and offers great side-to-side motion during use.
Replaceable padding is easy to clean and/or replace for continued comfort.
The device is certified and compatible with 2 types of hardware:
8A style Helmet Clips and 8A style Helmet Hardware (SKU: NZHC008A) (included with device).
Spring Clips (SKU: NZSC1015) and 2A style Helmet Kit (SKU: NZHC001A) (included with device).
Certifications: SFI 38.1 approved.
Manufacturer Part Number: NT008003S (Small); NT008003M (Medium); NT008003L (Large).
Sedan / Saloon Cars including: NASCAR, GT's, Busch, Sprint, Midget, Quarter Midget, Drag, Modified, Bandalero and similar.
All sportscars including Porsche, BMW, Corvette, Honda, Viper etc. All Panoz Racing Series cars.
Any other motorsports/racing car series application with a more upright seating position.

6 answered questions
Yes. The Zamp Z-Tech Series 8A includes a helmet kit whichever clip style you use: the 8A clips with the 8A helmet hardware (NZHC008A), or Zamp spring clips (NZSC1015) with the 2A-style helmet kit (NZHC001A). The kit mounts to a helmet with M6 inserts and covers one helmet.
For a second helmet, add the
Yes. One Zamp Z-Tech 8A can serve two helmets if each helmet has its own anchors installed in its M6 inserts. The 8A comes with its 8A clips and one set of 8A helmet hardware, so the second helmet needs its own set.
For the second helmet, the
The 8A Strap System is an optional Zamp accessory for the Z-Tech 8A. In our video with Zamp Racing, Zamp explains that it lets you get in and out of the car without removing the device each time. It is not included with the 8A.
The 8A Strap System is not part of the FAST RACER catalog right now, so contact us if you want help sourcing one. The 8A itself already includes its 8A clips and one set of helmet hardware. See our
No. FIA-rated helmet anchors do not change the certification of the Zamp Z-Tech 8A itself. The Zamp Z-Tech Series 8A FIA Helmet Anchors Kit is rated FIA 8858-2010/SFI 38.1, but the 8A device's listed certification is SFI 38.1. The anchors and the device carry separate ratings.
If your series requires an FIA 8858 head and neck restraint, check your rulebook and compare FIA-rated devices in FAST RACER's
Install the Zamp Z-Tech 8A helmet hardware on a helmet with M6 inserts. Zamp's 8A manual says to remove the black cap from the back of the helmet kit, set the baseplate against the shell centered on the M6 insert, then put the M6 xxxx through the post with blue thread locker on the end.
Tighten the xxxx snugly without cross-threading and let the thread locker dry. The center post of the 8A helmet kit must point toward the back of the helmet. More detail is in our
Choose a Zamp Z-Tech 8A in Small, Medium or Large based on your build, because the 8A is not one adjustable size like the Z-Tech 2A and 6A. As a reference point from our video with Zamp Racing, a driver who is 6 feet tall and 200 pounds prefers a size Medium.
If you are between sizes, contact FAST RACER with your height, weight and seat setup before you order, since only unused items can be returned. Read the sizing section of our