Call or Text,
M-F, 9 AM - 06 PM ET
Call or Text
Mon-Fri, 09 AM - 06 PM ET
Outfit a second helmet or replace worn hardware with the Zamp Z-Tech Series 2A/3A/6A Helmet Anchors Kit. This SFI 38.1 set of two helmet anchors is for use with the Zamp Z-Tech Series 2A, Zamp Z-Tech Series 3A, and Zamp Z-Tech Series 6A FHR head and neck restraints.
Key features include:
Set of Two Anchors: Comes as a complete pair so both sides of your helmet are covered.
Replacement or Extra Helmet Setup: Use it to outfit a second helmet or to replace your current helmet hardware.
Series 2A, 3A, and 6A Compatible: Only compatible with Z-Tech Series 2A, 3A, and 6A helmet clips.
Not for Series 8A: Not compatible with Series 8A helmet clips. For the Z-Tech Series 8A, shop the Zamp Z-Tech Series 8A Helmet Anchors Kit.
SFI 38.1: SFI 38.1 rated helmet anchors kit.
In the Box: 1 set with 2 FHR anchors.
Manufacturer Part Number: NZHC001A (Zamp Z-Tech Series 1A/4A Helmet Kit Complete).
How to Install the Z-Tech Helmet Kit to Your Helmet
How to Connect the Helmet Kit to Your FHR
4 answered questions
The Zamp Z-Tech Series 2A/3A/6A Helmet Anchors Kit, part number NZHC001A, fits the Zamp Z-Tech 2A, 3A and 6A, which all connect with Zamp spring clips. It is also the right kit for a Zamp Z-Tech 8A that runs Zamp spring clips (NZSC1015) instead of its standard 8A clips.
It does not fit the 8A clips. Those pair only with 8A-style hardware, such as the
Yes. The Zamp Z-Tech 2A and 6A each ship with helmet hardware for one helmet, and that hardware is the 2A-style helmet kit, part number NZHC001A. This kit carries the same part number, so it replaces a lost or worn set, or fits a new helmet with matching hardware.
It is a set of two anchors, one for each side, that mount to a helmet's M6 inserts. Keep the part number handy when you reorder, because the
No FIA 8858-2010 rating is listed for the Zamp Z-Tech Series 2A/3A/6A Helmet Anchors Kit. Zamp's FIA-rated hardware is the 8A FIA Helmet Anchors Kit, rated FIA 8858-2010/SFI 38.1, and it works only with 8A-style clips, so it cannot replace this kit on a Z-Tech 2A, 3A or 6A.
The Z-Tech devices themselves are certified to SFI 38.1. If your series requires FIA-rated equipment, check your rulebook first, then compare FIA-rated options in our
Yes. The Zamp Z-Tech Series 2A/3A/6A Helmet Anchors Kit screws into M6 inserts, the threaded mounting points on each side of a helmet that restraint anchors attach to. One anchor goes on each side, and one kit outfits one helmet.
If your helmet has no M6 inserts, Zamp's owner's manual lists an accessory backplate, part NZBP0016, that fits between the shell and the foam liner. FAST RACER does not list it, so contact us before you order. Compare all three kits in our guide to