Call or Text,
M-F, 9 AM - 06 PM ET
Call or Text
Mon-Fri, 09 AM - 06 PM ET
The main difference between the Zamp Z-Tech helmet anchors kits is which device clips they fit. The 2A/3A/6A Helmet Anchors Kit fits the Z-Tech 2A, 3A and 6A, plus the 8A when it runs Zamp spring clips. The 8A Helmet Anchors Kit and the 8A FIA Helmet Anchors Kit fit the 8A-style clips. Choose the 8A FIA kit if you want anchors rated FIA 8858-2010 as well as SFI 38.1. FAST RACER sells all three.
Your Zamp Z-Tech device already includes helmet hardware for one helmet, so these kits are for a second helmet or for replacing worn hardware. This comparison covers which 2A/3A/6A kit, 8A kit or 8A FIA kit fits your device, using the product listings and Zamp's owner's manuals. To compare head and neck restraints across brands, see our HANS devices.
All three are a set of two anchors that mount into a helmet's M6 inserts. The differences are clip compatibility, certification, finish and price.
| Attribute | 2A/3A/6A Kit | 8A Kit | 8A FIA Kit |
|---|---|---|---|
| Part number | NZHC001A | NZHC008A | NZHC008F02 / F04 / F15 |
| Fits these clips | Z-Tech 2A, 3A and 6A clips; Zamp spring clips (NZSC1015) on the 8A | 8A-style clips | 8A-style clips |
| Not compatible with | 8A-style clips | 2A, 3A and 6A clips | 2A, 3A and 6A clips |
| Certification | SFI 38.1 | SFI 38.1 | FIA 8858-2010 and SFI 38.1 |
| In the box | Set of 2 anchors | Set of 2 anchors | Set of 2 anchors (Tie) |
| Finish | Silver | Black with Z-TECH and SFI 38.1 silk screen | Red, blue or gray |
| Helmet mount | M6 insert | M6 insert | M6 insert (Tie) |
| Relative price | Lowest | Middle | Highest |
| Best for | A second helmet for a 2A, 3A or 6A, or an 8A on spring clips | A second helmet for an 8A on SFI-only rules | An 8A owner who wants FIA 8858-2010 anchors |
Your device's clips decide the kit, not the other way round. The Zamp Z-Tech 2A, 3A and 6A use the 2A/3A/6A Helmet Anchors Kit. The Z-Tech 8A is certified with two hardware types: the 8A-style clips with 8A helmet hardware, or Zamp spring clips with the 2A-style helmet kit. Zamp includes the helmet kit with the 8A for either clip style. So an 8A owner can use the 8A kit, the 8A FIA kit or, on spring clips, the 2A/3A/6A kit. A 2A, 3A or 6A owner can only use the 2A/3A/6A kit. Not sure which device fits you? See our Zamp Z-Tech 2A vs 6A vs 8A comparison.
Only if your rulebook or helmet setup calls for FIA-rated anchors. The 8A FIA Helmet Anchors Kit is certified to both FIA 8858-2010 and SFI 38.1. The 2A/3A/6A kit and the standard 8A kit are SFI 38.1. FIA 8858 is the international standard covering a head and neck restraint and its helmet anchors, while SFI 38.1 is the US specification. Rated anchors do not change the device's own rating: the Z-Tech 8A device carries SFI 38.1. This difference favors the FIA kit for drivers in FIA-sanctioned events.
Yes, with Zamp spring clips (NZSC1015) on the 8A. Zamp lists this as the 8A's second certified hardware setup: spring clips paired with the 2A-style helmet kit. The pairing is strict in both directions. The 8A-style clips work only with 8A helmet hardware, and the spring clips work only with the 2A/3A/6A helmet hardware. This matters if you already own a 2A or 6A and want one style of hardware on every helmet.
Mostly, yes. All three mount into a helmet's M6 inserts with an M6 screw, and Zamp's manuals call for blue thread locker on the end of the screw, tightened snugly without cross-threading. The 2A-style kit is a post, a baseplate and an M6 screw for each side. For the 8A kits, Zamp's 8A manual adds two steps: remove the black cap from the back of the kit first, and point the center post toward the back of the helmet. For helmets without M6 inserts, Zamp's manuals list an accessory backplate, part NZBP0016.
Each kit has its own finish. The 2A/3A/6A kit is silver. The standard 8A kit is black with Z-TECH and SFI 38.1 silk-screened on it. The 8A FIA kit is offered in red, blue and gray, so you can match the anchors to your helmet. Color availability changes, so check the 8A FIA product page for the colors in stock before you order.
Pros
Cons
Pros
Cons
Pros
Cons
Start with the clips on your Zamp Z-Tech device, then decide whether you need FIA-rated anchors.
Choose the 2A/3A/6A Helmet Anchors Kit if:
Choose the 8A Helmet Anchors Kit if:
Choose the 8A FIA Helmet Anchors Kit if:
Consider neither if:
Buy with less risk. Orders over $50 ship free to the 48 contiguous US states and Washington, D.C. FAST RACER accepts returns and exchanges within 30 days for eligible items that are unused and in as-new condition, in the original packaging. Accessories that come in sealed packaging cannot be returned once opened, so check compatibility before you open the kit. The manufacturer's warranty covers defects in materials and workmanship, and FAST RACER can act on your behalf with Zamp on a claim.
It depends on the clips on your Zamp Z-Tech 8A. With the standard 8A clips, use the Zamp Z-Tech Series 8A Helmet Anchors Kit or the 8A FIA Helmet Anchors Kit. With Zamp spring clips, use the 2A/3A/6A Helmet Anchors Kit. The 8A clips and the spring clips each work only with their own matching hardware.
The Zamp Z-Tech Series 2A/3A/6A Helmet Anchors Kit is the lowest-priced of the three, the standard 8A Helmet Anchors Kit sits in the middle, and the 8A FIA Helmet Anchors Kit costs the most. The extra cost of the FIA kit pays for its FIA 8858-2010 rating. Check each product page for current prices.
Zamp helmet anchors kits are covered by the manufacturer's warranty for defects in materials and workmanship, and FAST RACER can act on your behalf with Zamp on a claim. The warranty does not cover misuse, accidents, alteration or abnormal wear. A warranty length for the kits is not published, so confirm it with FAST RACER before you buy.
Yes. Each Zamp Z-Tech helmet anchors kit, whether the 2A/3A/6A kit, the 8A kit or the 8A FIA kit, is a set of two anchors, one for each side of the helmet. One kit outfits one helmet with M6 inserts. A second helmet needs its own kit, mounted the same way.
No. The Zamp Z-Tech Series 8A FIA Helmet Anchors Kit is not compatible with the Z-Tech 2A, 3A or 6A helmet clips. Those three devices use the Zamp Z-Tech Series 2A/3A/6A Helmet Anchors Kit, part number NZHC001A. The 8A FIA kit works with the 8A-style clips only.
The main difference between the Zamp Z-Tech helmet anchors kits is which clips they fit. Choose the 2A/3A/6A Helmet Anchors Kit for a 2A, 3A or 6A, or for an 8A on spring clips. Choose the 8A Helmet Anchors Kit for an 8A with 8A-style clips under SFI rules. Choose the 8A FIA Helmet Anchors Kit when you want FIA 8858-2010 and SFI 38.1 anchors on an 8A.
Emerson Bersaghi is Co-Founder, COO, and CGO of Fast Racer, an e-commerce brand scaling motorsport apparel, parts, and performance gear worldwide. A lifelong kart racer, Emerson brings 29 years of executive leadership at Whirlpool Corporation to Fast Racer's growth strategy. He holds an Executive MBA from Purdue's Daniels School of Business, an MBA from FGV EAESP in Brazil, and a B.S. in Mechanical Engineering from UDESC. At Fast Racer, he drives growth strategy, brand positioning, and strategic partnerships behind the company's sustained double-digit YoY expansion.
1 answered question
Yes, if your Zamp Z-Tech 8A uses its standard 8A clips. The 8A ships with a helmet kit for one helmet, and the Zamp Z-Tech Series 8A FIA Helmet Anchors Kit works with the same 8A-style clips, so it can replace a lost or worn set.
It also brings an FIA 8858-2010/SFI 38.1 rating to your helmet hardware. If your 8A runs Zamp spring clips, replace its hardware with the
Start with the model. The Zamp Z-Tech 2A, 3A and 6A use Zamp spring clips. The Z-Tech 8A ships with 8A clips, but it is also certified with Zamp spring clips (NZSC1015), so an 8A can run either clip style.
The helmet kit in your 8A box matches the clips you chose: 8A helmet hardware (NZHC008A) with 8A clips, or the 2A-style kit (NZHC001A) with spring clips. Then order the matching kit: the
Pending answer submission
Zamp 8A clips are the newest Z-Tech clip style. They connect to an 8A-style helmet kit that Zamp Racing describes as spring-loaded for easy in-and-out connection. Zamp spring clips connect to the 2A-style helmet kit and come on the Z-Tech 2A, 3A and 6A, and Zamp designed them to make disconnecting from the helmet easier.
Each clip style works only with its own hardware. The Z-Tech 8A is certified with either style. Match your clips to the
Only if your series or event requires FIA-rated helmet hardware. The Zamp Z-Tech 2A, 6A and 8A are certified to SFI 38.1, and Zamp's FIA option is the
FIA-rated anchors do not change your device's own rating. Check your rulebook first, then compare FIA-rated devices in our