Staff Answer
Nov 12, 2026 - 10:16 AM
Setup depends on the Zamp Z-Tech model. For the 2A and 6A, set the shoulder width 1 inch wider than your neck, set both arms snug at the same angle in your race seat, then adjust the tethers so the clips engage the straps 1.75 to 2 inches from your driving position.
For the 8A, start at 4 cm from the clip end to the H buckle and 13 cm from the clip center to the frame, then make the same check. Zamp recommends a trained dealer. See the 2A review and 8A review.
